|
347014722
|
0112300
|
2023-10-05
|
20 PROVIDENCE PIKE, NORTH SMITHFIELD, RI, 02896
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2023-10-05
|
| Emphasis |
L: EISAOF, L: EISAX50, N: RCS-NEP
|
Related Activity
| Type |
Complaint |
| Activity Nr |
2088482 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100028 B01 I |
| Issuance Date |
2024-03-25 |
| Abatement Due Date |
2024-05-08 |
| Current Penalty |
2028.0 |
| Initial Penalty |
4056.0 |
| Final Order |
2024-04-02 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.28(b)(1)(i): Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i). (a) Facility at 20 Providence Pike in NORTH SMITHFIELD, RI: On or about October 10, 2023, employees were exposed to a fall hazard of approximately six feet and two inches (6'2") at the loading dock inside the northeast corner of the building without a guardrail or other adequate fall protection. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100134 C02 II |
| Issuance Date |
2024-03-25 |
| Abatement Due Date |
2024-05-08 |
| Current Penalty |
2028.0 |
| Initial Penalty |
4056.0 |
| Final Order |
2024-04-02 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user. (a) Facility at 20 Providence Pike in NORTH SMITHFIELD, RI: On or about October 10, 2023, the employer provided elastomeric respirators, such as the 3M 7500 series with the P100 filter, without providing medical evaluations and training to ensure the employees in the fabrication area could safely wear the respirators and protect themselves from hazards including, but not limited to, silica dust. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100134 K06 |
| Issuance Date |
2024-03-25 |
| Abatement Due Date |
2024-05-08 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2024-04-02 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer. (a) Facility at 20 Providence Pike in NORTH SMITHFIELD, RI: On or about October 10, 2023, the employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, to employees that work in the shop area that were allowed to wear respiratory protection such as N-95s and elastomeric respirators. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19101200 G08 |
| Issuance Date |
2024-03-25 |
| Abatement Due Date |
2024-05-08 |
| Current Penalty |
284.5 |
| Initial Penalty |
569.0 |
| Final Order |
2024-04-02 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s). (a) Facility at 20 Providence Pike in NORTH SMITHFIELD, RI: On or about October 10, 2023, the employer did not maintain the current required safety data sheet(s) for all hazardous chemicals in the workplace, including but not limited to, PRIDE QUARTZ STONE. |
|
|
|
345157689
|
0112300
|
2021-02-22
|
20 PROVIDENCE PIKE, NORTH SMITHFIELD, RI, 02896
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2021-02-22
|
| Case Closed |
2021-06-15
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1736422 |
| Safety |
Yes |
|
|
|
345021950
|
0112300
|
2020-11-13
|
20 PROVIDENCE PIKE, NORTH SMITHFIELD, RI, 02896
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2020-11-13
|
| Emphasis |
N: RCS-NEP, L: FORKLIFT
|
| Case Closed |
2022-11-29
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1685791 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Other |
| Standard Cited |
19100132 D01 |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2022-06-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
6007.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) Workplace On or about 11/13/20, the employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). Abatement Note: Once the PPE Hazard Assessment is completed you shall: 1) Certify that the hazard assessment has been performed through a written certification in accordance with 1910.132(d)(2), 2) Provide training to affected employees in proper use of required PPE 1910.132 (f)(1). Guidance on conducting and documenting a PPE Hazard Assessment can be found on OSHA's website at: http://www.osha.gov/SLTC/personalprotectiveequipment/ |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100133 A01 |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2021-06-30 |
| Current Penalty |
2574.6 |
| Initial Penalty |
0.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: (a)Stone fabrication area On or about 11/13/20, the employer did not ensure that employees wore protective eye equipment to include safety glasses when polishing and fabricating stone, where there was a reasonable probability of injury that could be prevented by such equipment. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100138 A |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2021-06-14 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.138(a):The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes: (a) Stone fabrication area On or about 11/13/20, employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from severe cuts or lacerations while working with razor blades. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19101053 D03 III |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2022-06-30 |
| Current Penalty |
2574.6 |
| Initial Penalty |
4291.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1053(d)(3)(iii): Where the most recent exposure monitoring indicated that employee exposures were at or above the action level but at or below the PEL, the employer did not repeat such monitoring within six months of the most recent monitoring: (a) Stone fabrication area: On or about 11/13/20, when the most recent respirable crystalline silica exposure monitoring indicated that employee exposures were at or above the action level but at or below the PEL, the employer did not repeat such monitoring within six months of the most recent monitoring. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19101053 F02 I |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2022-06-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1053(f)(2)(i): The employer did not establish and implement a written exposure control plan: (a) Workplace On or about 11/13/20, the employer did not establish and implement a written exposure control plan. ABATEMENT NOTE: In accordance with 1910.1053(f)(2)(i)(A) through 1910.1053(f)(2)(i)(C) a written exposure control plan shall consist of: a. 1910.0153(f)(2)(i)(A), A description of the tasks in the workplace that involve exposure to respirable crystalline silica; b. 1910.0153(f)(2)(i)(B), A description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task; c. 1910.0153(f)(2)(i)(C), A description of the housekeeping measures used to limit employee exposure to respirable crystalline silica; and Further assistance in developing a written respirable crystalline silica exposure is available in OSHA Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for General Industry and Maritime. This document is available on the internet at the following website address: https://www.osha.gov/Publications/OSHA3911.pdf |
|
| Citation ID |
01002C |
| Citaton Type |
Serious |
| Standard Cited |
19101053 I01 I |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2022-06-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1053(i)(1)(i): The employer did not make medical surveillance available at no cost to each employee, and at a reasonable time and place, for each employee who has been occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year: (a) Stone Fabrication Area On or about 11/13/20, the employer did not make medical surveillance available at no cost to each employee, and at a reasonable time and place, for each employee who has been occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100022 A01 |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2021-06-30 |
| Current Penalty |
289.2 |
| Initial Penalty |
482.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition: (a) Worksite On or about 11/13/20, the employer did not ensure that all work areas were kept in a clean, orderly, and sanitary condition, to include: 1) In the water treatment area, equipment was not stored off the walkways, including temporary lighting cords, water hoses and stepladders. 2) In the stone fabrication area, razor blades were left unattended on counter tops and improperly disposed of on floors and in floor drains. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100179 J03 |
| Issuance Date |
2021-05-11 |
| Abatement Due Date |
2021-06-30 |
| Current Penalty |
289.2 |
| Initial Penalty |
482.0 |
| Final Order |
2021-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: (a) Workplace: On or about 11/13/20, a complete periodic inspection of the 5 and the 20 ton gantry cranes had not been conducted with in the past 12 months. |
|
|
|
342505518
|
0112300
|
2017-07-28
|
20 PROVIDENCE PIKE, NORTH SMITHFIELD, RI, 02896
|
|
| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2017-07-28
|
| Emphasis |
L: R1NOISE, P: R1NOISE
|
| Case Closed |
2019-09-24
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100095 C01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-06-04 |
| Current Penalty |
1448.0 |
| Initial Penalty |
2897.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: (a) Stone slab fabrication finishing and polishing areas: The following employees were exposed to noise in excess of the OSHA Action Level and were not included in an effective Hearing Conservation Program: 1) On 8-24-17 an employee performing fabrication finishing and polishing work in this area was exposed to noise levels in excess of the OSHA Action Level of 85 dBA for an eight hour time weighted average. This employee was exposed to noise levels of 88.3 dBA for 492 minutes for a dose of 81.4 % which is in excess of the allowable 50% dose. Zero exposure was assumed for any unsampled time. 2) On 8-24-17 an employee performing polishing work in this area was exposed to noise levels in excess of the OSHA Action Level of 85 dBA for an eight hour time weighted average. This employee was exposed to noise levels of 93.8 dBA for 461 minutes for a dose of 161.2 % which is in excess of the allowable 50% dose. Zero exposure was assumed for any unsampled time. 3) On 8-24-17 an employee performing fabrication finishing and polishing work in this area was exposed to noise levels in excess of the OSHA Action Level of 85 dBA for an eight hour time weighted average. This employee was exposed to noise levels of 94.6 dBA for 486 minutes for a dose of 191 % which is in excess of the allowable 50% dose. Zero exposure was assumed for any unsampled time. 4) On 8-24-17 an employee performing polishing work in this area was exposed to noise levels in excess of the OSHA Action Level of 85 dBA for an eight hour time weighted average. This employee was exposed to noise levels of 90.2 dBA for 466 minutes for a dose of 99.9 % which is in excess of the allowable 50% dose. Zero exposure was assumed for any unsampled time. 5) On 8-24-17 an employee performing polishing work in this area was exposed to noise levels in excess of the OSHA Action Level of 85 dBA for an eight hour time weighted average. This employee was exposed to noise levels of 87.1 dBA for 500 minutes for a dose of 69.9 % which is in excess of the allowable 50% dose. Zero exposure was assumed for any unsampled time. 6) On 8-24-17 an employee performing fabrication finishing and polishing work in this area was exposed to noise levels in excess of the OSHA Action Level of 85 dBA for an eight hour time weighted average. This employee was exposed to noise levels of 91.6 dBA for 441 minutes for a dose of 115 % which is in excess of the allowable 50% dose. Zero exposure was assumed for any unsampled time. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100095 D01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-06-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: a) Stone slab fabrication finishing and polishing areas: On or about 7-28-17 when information had indicated that an employee's exposure equaled or exceeded the 8-hour time-weighted average of 85 decibels, the employer had not developed and implemented a noise level monitoring program. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100095 G01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-06-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(g)(1): The employer did not establish and maintain an audiometric testing program as provided by 29 CFR 1910.95(g) by making audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels: a) Stone slab fabrication finishing and polishing areas: On or about 8-24-17 the employer did not make audiometric testing available to all employees whose exposures equaled or exceeded an 8-hour time-weighted average of 85 decibels. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19100095 K01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-06-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(k)(1): The employer did not train each employee who is exposed to noise at or above an 8-hour time-weighted average of 85 decibels in accordance with the requirements of 29 CFR 1910.95(k). The employer did not institute a training program and ensure employee participation in the program: a) Stone slab fabrication finishing and polishing areas: On or about 8-24-17 the employer did not train each employee who is exposed to noise at or above an 8-hour time-weighted average of 85 decibels in accordance with the requirements of 29 CFR 1910.95(k). |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100106 D02 I |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-06-04 |
| Current Penalty |
1448.0 |
| Initial Penalty |
2897.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.106(d)(2)(i): Approved containers and portable tanks were not used to store flammable or combustible liquids: a) Stone slab fabrication finishing and polishing areas: On or about 8-24-17 approved containers were not used to store flammable liquids such as acetone and Ager. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100106 E02 IV C |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-06-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.106(e)(2)(iv)(c): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), were used where there were open flames or other sources of ignition within the possible path of vapor travel: a) Stone slab fabrication finishing and polishing areas: On or about 8/24/17, category 3 flammable liquids (three 5 gallon containers of GranQuartz Recon Polyester Adhesive), with a flashpoint of 88 degrees F, were located adjacent to an active grinding operation where sparks were being generated. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100242 A |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-01-09 |
| Current Penalty |
1811.0 |
| Initial Penalty |
3622.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition: a) Stone slab fabrication finishing and polishing areas: On or about 8/24/17: 1) A hand held grinder was in operation cutting stone with a cutting blade and no guard. 2) A hand held grinder was in operation as a bench top grinder to sharpen a tool with an abrasive grinding wheel and no guard. |
|
| Citation ID |
01004A |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-01-09 |
| Current Penalty |
2173.0 |
| Initial Penalty |
4346.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: a) Stone slab fabrication finishing and polishing areas: On or about 8/24/17 the following was observed: 1. An electrical extension cord powering a floor fan had breaks in the outer jacket exposing electrical conductors, 2. An electrical extension cord powering a circular saw had breaks in the outer jacket exposing electrical conductors. |
|
| Citation ID |
01004B |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B02 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-01-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Stone slab fabrication finishing and polishing areas: On or about 8-24-17 the employer had not ensured that electrical equipment was being used in accordance with instructions included on the equipment listing in that electrical extension cords were powering various power strips. |
|
| Citation ID |
01004C |
| Citaton Type |
Serious |
| Standard Cited |
19100305 G01 IV |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-01-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv): a) Stone slab fabrication finishing and polishing areas: On or about 8/24/17, extension cords were used in lieu of permanent wiring to power the following: 1. Floor fan adjacent to dust collection booth, 2. Power strip at work bench in dust collection booth. |
|
| Citation ID |
01005A |
| Citaton Type |
Serious |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-03-05 |
| Current Penalty |
1449.0 |
| Initial Penalty |
2897.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): (a) Stone slab fabrication finishing and polishing areas: On or about 8-28-17 the employer had not developed or implemented a written hazard communication program. |
|
| Citation ID |
01005B |
| Citaton Type |
Serious |
| Standard Cited |
19101200 F05 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-03-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: (a) Stone slab fabrication finishing and polishing areas: On or about 8-24-17 the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained in them. |
|
| Citation ID |
01005C |
| Citaton Type |
Serious |
| Standard Cited |
19101200 H01 |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-03-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) Stone slab fabrication finishing and polishing areas: On or about 8-24-17 the employer had not provided effective information and training to employees on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100134 C02 II |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-09-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: a) Stone slab fabrication finishing and polishing areas: On or about 7/28/17, the employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100134 D01 III |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-09-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form: a) Stone slab fabrication finishing and polishing areas: On or about 7/28/17, the employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards, such as dust. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100141 A03 I |
| Issuance Date |
2018-01-02 |
| Abatement Due Date |
2018-02-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-01-30 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed: a) Stone slab machining and fabrication finishing and polishing areas: The employer did not maintain the floors, equipment, shelving and dust collection systems free of excessive stone dust accumulation and debris. |
|
|
