| Citation ID |
01001A |
| Citaton Type |
Other |
| Standard Cited |
19100134 D01 III |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-12-09 |
| Current Penalty |
1000.0 |
| Initial Penalty |
3400.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
42 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminants chemical state and physical form: Worksites including the Solids Handling Building: On or about 3/13/13 the employer had not provided reasonable estimates of employee exposures to respiratory hazards including, but not limited to respirable dust exposures when maintaining incineration and ash handling operations. |
|
| Citation ID |
01001B |
| Citaton Type |
Other |
| Standard Cited |
19100134 F02 |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-10-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
42 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested whenever a different respirator facepiece (size, style, model or make) was used: Worksite: Employees were provided with N-95 Particulate Respirators without being fit tested prior to use. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100134 G01 I A |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-10-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: Workplace: Several employees with facial hair did not remove facial hair prior to use of N-95 dust mask type respirators. |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100151 C |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-10-23 |
| Current Penalty |
1000.0 |
| Initial Penalty |
3400.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: The Underground Utility Gallery between the Solids Handling Building and the Blower Building: On or about 4/2/13 the employer had not provided suitable facilities for quick drenching or flushing of the eyes and body when the lime slurry conveyance lines are serviced. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-09-17 |
| Current Penalty |
1500.0 |
| Initial Penalty |
2550.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. Maintenance Shop: The unused portion of the Dayton belt and disc sander was not adequately guarded exposing employees to the rotating parts. |
|
| Citation ID |
01004A |
| Citaton Type |
Other |
| Standard Cited |
19100304 G05 |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-09-17 |
| Current Penalty |
1000.0 |
| Initial Penalty |
3400.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a. Solids Handling Building, first floor near incinerator: The Dayton floor fan was not grounded in that its ground pin was missing. |
|
| Citation ID |
01004B |
| Citaton Type |
Other |
| Standard Cited |
19100305 G01 IV |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-09-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv)(a): a. Maintenance Shop, Basement: Temporary wiring powering a sump pump was used in lieu of permanent wiring. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100037 B02 |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-09-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": Control Room, Solids Handling Building: The exterior exit was not provided with an "EXIT" sign. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100095 D01 |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-12-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
42 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: Solids Handling Building: On or about 4/2/13 the employer had not monitored employee noise exposure for employees working adjacent to the sludge and ash processing equipment. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100120 Q01 |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-12-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.120(q)(1): The employer did not develop and implement an emergency response plan to handle anticipated emergencies prior to commencement of emergency response operations: Dechlorination Building: On or about 3/13/13 the employers emergency action plan had not been updated to reflect the current practice of evacuation with no emergency response into the facility when alarms sound. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19100147 C04 II |
| Issuance Date |
2013-09-09 |
| Abatement Due Date |
2013-10-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-09-19 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items of this section: a. Establishment: The employer's energy control procedure did not specifically state the techniques to be used to lock or tag out each type of machine. |
|
